The EQ series pumps are designed for water supply and pressure boosting in residential, commercial and light industrial applications where low or inadequate water pressure exists. Operating Conditions:
    Ambient temperature: Max. +40°C
    Liquid temperature: +4°C ~ +40°C
    System Pressure: Max. 8.5 kg/cm²
    Relative humidity: Max. 85% (RH)
    Under normal operation, it is not necessary to adjust the pressure unless the cut in pressure is
    higher than preset activation point (refer to speciation).
  • It is suitable for boosting pressure from underground or surface water supplies.
  • The EQ is a complete, all-in-one unit, consisting of centrifugal pump, motor, pressure tank, and electronic controller. The built-in electronic controller provides constant pressure which ensures that the pump starts automatically when water is consumed and operates continuously until water is not required.
  • Compact design and quiet operation make the EQ series suitable for many applications.
  • The EQ is constructed from the top quality corrosion resistant materials.
  • Pump has built in dry-run shut off with automatic reset function.
  • The motor has built-in thermal overload to protect against high operating temperatures and over current. (Single phase motor only)
  • The EQ has an anti-cycling feature which prevents the pump from continuous starting and stopping when you have a dripping tap or minor leak in the system.
  • The pumps will lift water up to 7.6m. with foot valve and pump suction piping filled with water.